Getting Started; Control Panel - Ricoh 3045 - Aficio B/W Laser Facsimile Reference Manual

Control Panel

The actual machine control panel may differ from this illustration depending on
installed optional units. This illustration has all options installed.
1.
Indicators
Shows errors and machine status.
L: Service Call indicator
x: Misfeed indicator
M: Open Cover indicator
d: Add Staple indicator
D: Add Toner indicator
B: Paper run-out indicator
See "Control Panel", General Settings
Guide.
2. {User Tools/Counter} key
User Tools:
Press to enter User Tools mode. These
tools allow you to customize default set-
tings. See p.141 "Facsimile Features",
Facsimile Reference <Advanced Features> .
Counter:
Displays and prints the total number of
copied or printed pages.
3.
Display Panel
This guides you through tasks and dis-
plays the machine status. Messages ap-
pear here. See p.9 "Reading the Display".

1. Getting Started

4.
{Check Modes} key
Press before pressing the {Start} key to
check the settings selected for the fax
about to be sent. See p.24 "Checking the
transmission settings".
5.
{Program} key
Enables you to program frequently used
settings and recall previously programmed
settings. See p.129 "Programs", Facsimile
Reference <Advanced Features> .
6. {Clear Modes} key
Press to cancel the current settings.
7.
On indicator
This indicator lights when the operation
switch is turned on.
Important
❒ Do not turn off the main power
switch while the On indicator stays
lighted or is blinking. Neglecting
this may damage the hard disk.
Note
❒ If the main power switch is on even
when the On indicator is off, the ma-
chine will receive a fax document.
AJA101S
7