Connection Options; Install Software - Epson WorkForce WF-3520 Start Here

7
Install software
Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see "Epson technical
support").
Caution: Be sure to close your other programs, including any screen
savers and virus protection programs, before beginning this software
installation.
1
Make sure the printer is
NOT CONNECTED to
your computer.
Windows : If you see a Found
®
New Hardware screen, click
Cancel and disconnect the USB
cable. You can't install your
software that way.
2
Insert your product CD.
3
Windows: If you see the AutoPlay window, click
Run Setup.exe. If you see the User Account Control
screen, click Yes or Continue.
Mac OS X: Double-click the
4
Click Install (Windows) or Continue (Mac OS X) and
follow the instructions on your computer screen.
5
When you see the Select Your Connection screen, check
the "Connection options" section on this sheet for more
information.
Choose your connection. Then click Next (Windows) or
Continue (Mac OS X) and follow the instructions on your
computer screen.
Epson icon.
Connection options
Wireless connection
You must install the software on every computer from which
you want to print. For the first installation, we recommend
using a USB cable (not included) to simplify wireless setup.
After the printer is connected to the network, you will be
prompted to remove the cable.
If you're using Mac OS X 10.6, 10.7, or 10.8, or you don't
have a USB cable, you will need to use the control panel on
the printer to select wireless settings. Follow the instructions
on your computer screen during software installation; they will
explain how to connect the printer wirelessly this way.
Make sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set
up your network.
To view how-to videos on setting up your printer's wireless
connection, go to epson.com/support (U.S.) or
epson.ca/support (Canada).
Direct USB connection
Make sure you have a USB cable (not included).
Wired network connection
Make sure you have an Ethernet
included). You must install the software on every computer
from which you want to print.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Passwords must be entered in the correct case.
Use the function buttons to select uppercase (AB12),
lowercase (ab12), symbols, or spaces, and to delete
characters.
Press on the printer to highlight a letter or
function button.
Press OK to select it.
Highlight Done and press OK.
The printer's screen is dark.
Press a button to wake the printer from sleep mode.
®
network cable (not
Function buttons