Declaration Of Conformity - Epson WorkForce Pro WP-4520 Important Safety Instructions Manual

■
Do not put your hand inside the product or touch any cartridges during printing.
■
Install a new ink cartridge immediately after removing an expended one. Leaving cartridges
uninstalled can dry out the print head and may prevent the product from printing.
■
Do not remove or tear the label on the cartridge; this can cause leakage.
■
Do not touch the green IC chip on the side of the cartridge. This may prevent normal
operation.
■
If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the product. Note that there is a valve in the ink supply
port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining
items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding
area.
■
Use an ink cartridge before the date printed on its package.
■
Do not dismantle an ink cartridge. This could damage the print head.
■
Store ink cartridges in a cool, dark place.
■
After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room
temperature for at least three hours before using it.
■
Store ink cartridges with their labels facing upward. Do not store cartridges upside down.

Declaration of Conformity

According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals; and/or CPU
Boards and Power Supplies used with Class B Personal Computers:
We: Epson America, Inc.
Located at: MS 3-13
3840 Kilroy Airport Way
Long Beach, CA 90806
Telephone: (562) 290-5254
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and
15 of the FCC rules as a Class B digital device. Each product marketed is identical to the
representative unit tested and found to be compliant with the standards. Records maintained
continue to reflect the equipment being produced can be expected to be within the variation
accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Trade Name: Epson
Type of Product: Multifunction printer
Model: C451A/C451C/C451E
Marketing name: WorkForce Pro WP-4520/WorkForce Pro WP-4533/WorkForce Pro
WP-4590
Important Safety Instructions
3