Canon 3749B002 On-Screen Manual page 690

Advanced Guide > > Scanning with Other Application Software
Scanning
> Scanning Film in Advanced Mode
ScanGear (Scanner Driver)
Scanning Film in Advanced Mode
In Advanced Mode, you can specify the color mode, output resolution, image brightness, color tone, etc.
when scanning.
This section explains how to scan film.
1.
Place the film on the Platen, then start ScanGear (scanner driver).
Placing Film
Starting ScanGear (Scanner Driver)
Important
Some applications cannot receive images scanned in Color(48bit) or Grayscale(16bit), or may
close when such images are received.
2.
Click Advanced Mode and select film for Select Source.
Note
Settings are not retained when you switch between modes.
3.
Set Select Source, Film Size and Color Mode.
Input Settings
4.
Click Preview.
Preview image appears in the Preview area. Images are cropped (scan areas are specified)
automatically according to the film size.
Select the frames to scan.
> Scanning with Advanced Settings Using