Table of Contents
Advertisement
7) Clear RTC RAM (3 pin CLRCMOS1)
These solder points allow you to clear the Real Time Clock (RTC)
RAM in CMOS. You can clear the CMOS memory of date, time, and
system setup parameters by erasing the CMOS RTC RAM data. The
RAM data in CMOS, that include system setup information such as
system passwords, is powered by the onboard button cell battery.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery.
3. Short the solder points.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS
setup to re-enter data.
CLRCMOS1
1 2
2 3
P4S133
®
Normal
Clear CMOS
(Default)
P4S133 Clear RTC RAM
28
Chapter 2: Hardware information
Advertisement
Table of Contents
