Table of Contents
Advertisement
6) Bass Center Setting (2x3 pin BCS1, BCS2)
Use these jumpers in conjunction with the C-Media PCI Audio Driver
and to adjust output for 4 or 6 speaker audio. No audio standard exists
for the three pick-up surfaces on male audio jacks, therefore it may be
necessary to switch jumpers from the default position, Center/Bass [1-
2] to Bass/Center [2-3] in order to reroute signals among the internal
leads in the Line-In, Line-Out, Mic female sockets. Make a test using
the Audio Driver software setup available on the Support CD.
P4S133
®
P4S133 Bass Center Setting
ASUS P4S133 motherboard user guide
1 2
BCS1
BCS1
BCS2
BCS2
(CENTER/BASS)
(Default)
2 3
(BASS/CENTER)
27
Advertisement
Table of Contents
