4. On the Print Setup tab, select the paper type.
5. Click OK.
Loading Original Documents
Into the ADF
You can load up to 50 sheets of an original document into the ADF for scanning, copying, and faxing.
The ADF is recommended for loading multiple-page documents.
1. Load an original document text side up into the ADF.
NOTE: Do not load postcards, photos, small items, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2. Adjust the paper guide on the ADF against the edges of the paper.
Load up to
50 sheets of letter size paper
50 sheets of legal size paper
50 sheets of A4 size paper
50 sheets of two-, three-, or
four-hole pre-punched media
50 sheets of edge-reinforced
three-hole copier media
ADF Paper Capacity
Make sure
The document is loaded text side up.
The paper guide rests against the edge of the paper.
The document is loaded text side up.
The paper guide rests against the edge of the paper.
The document is loaded text side up.
The paper guide rests against the edge of the paper.
The paper fits within these dimensions: Width: 8.27 – 8.5 inches
(210.0 – 215.9 mm) Length: 11.0 – 14.0 inches (279.4 – 355.6 mm)
The document is loaded text side up.
The paper guide rests against the edge of the paper.
The paper fits within these dimensions: Width: 8.27 – 8.5 inches
(210.0 – 215.9 mm) Length: 11.0 – 14.0 inches (279.4 – 355.6 mm)
The document is loaded text side up.
The paper guide rests against the edge of the paper.