Preparing Networking; Attaching Cables - Dell 1815dn - All-in-one Laser Printer Owner's Manual

Enter a one, two or three-digit speed dial number you want to assign to the group and press Select
6
( ).
Or select the location by pressing Scroll (
At the Add Another? prompt, press Select (
7
Or press Scroll (
desired numbers.
If you want to assign another group, repeat from step 3.
8
OR
Press Cancel (

Preparing Networking

A print server is any designated computer that centrally manages all client print jobs. If you are sharing
your printer in a small workgroup environment and want to control all print jobs on the network, follow
these instructions to attach the printer to a print server.
NOTE:
For additional network set-up configurations, see the

Attaching Cables

Make sure the printer is powered off and unplugged.
1
Connect one end of a standard category 5 Unshielded Twisted Pair (UTP) network cable into a LAN
2
drop or hub, and the other end into the Ethernet network port on the back of the printer. The printer
automatically adjusts the network speed.
26
Preparing Your Multi-Function Printer
or ) to display No and press Select (
) to return to Standby mode.
or ) and then press Select (
) to enter other speed dial numbers into the group.
) when you have entered all of the
User's Guide
.
).