Installing A Memory; Dimm Population Table - Gigabyte GA-6PXSV4 User Manual

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR3 DIMMs on this motherboard.
Installation Step:
Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
Note: For dual-channel and four-channel operation, DIMMs must be installed in matched pairs.
Step 3. Reverse the installation steps when you wish to remove the DIMM module.

1-4-3 DIMM Population Table

1N or 2N
1N
1N
1N
1N
R-DIMM
1N
1N
1N
1N
1N
2
DIMM1 DIMM0
Empty Single-Rank
Empty Dual-Rank
Empty Quad-Rank
Single-Rank
Single-Rank
Single-Rank Dual-Rank
Dual-Rank Dual-Rank
Single-Rank Quad-Rank
Dual-Rank Quad-Rank
Quad-Rank Quad-Rank
1
2
1N or 2N
1N
1N
U-DIMM
2N
2N
2N
- 15 -
DIMM1 DIMM0
Empty Single-Rank
Empty Dual-Rank
Single-Rank Single-Rank
Single-Rank Dual-Rank
Dual-Rank Dual-Rank
Hardware Installation