3-D Tones; Modify The Standby Mode - Nokia n95 8gb - Smartphone 8 GB User Manual

To modify a profile, scroll to the profile, and select
Options > Personalise. Scroll to the setting you want
to change, and press the scroll key to open the choices.
Tones stored in the mass memory of your device are
indicated with
In the tones list, select
service) to open a list of bookmarks. You can select a
bookmark and start connection to a web page to
download more tones.
If you want the caller's name to be spoken when your
device rings, select
Say caller's name
saved in Contacts.
To create a new profile, select
new.

3-D tones

Press , select Tools
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select
effects > On. To change the ringing tone, select
Ringing tone and the desired ringing tone.
To change the 3-D effect that is applied to the ringing
92
tone, select Sound trajectory
.
Download sounds
Options > Personalise, and set
to On. The caller's name must be
Options
>
Utilities 3-D tones.
> >
3-D ringing tone
and the desired effect.
To modify the effect, select from the following settings:
Trajectory speed
●
speed at which sound moves from one direction to
another. This setting is not available for all ringing
tones.
Reverberation
●
(network
To listen to the ringing tone with the 3-D effect, select
Options
do not select any 3-D effect, stereo widening is applied
to the ringing tone.
To adjust the ringing tone volume, select
Profiles
>
volume.
Create

Modify the standby mode

To switch the active standby on or off, press
select Tools
Personalisation
standby. The active standby display shows application
— Scroll left or right to adjust the
— Select the type of echo.
Play tone. If you enable the 3-D tones but
>
Options Personalise
>
Settings General
> >
Standby mode
>
Tools
>
Ringing
>
, and
>
Active
>