Wlan Connections; Wlan Wizard - Nokia n95 8gb - Smartphone 8 GB User Manual

WLAN connections

To use WLAN, you must create an internet access point
(IAP) in a wireless LAN. Use the access point for
applications that need to connect to the internet.
"WLAN internet access points," p. 33.
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the
risk of unauthorized access to your data.
A WLAN connection is established when you create a
data connection using a WLAN internet access point.
The active WLAN connection ends when you end the
data connection.
You can use WLAN during a voice call or when packet
data is active. You can only be connected to one WLAN
access point device at a time, but several applications
can use the same internet access point.
When the device is in the offline profile, you can still
use WLAN (if available). Remember to comply with any
applicable safety requirements when establishing and
using a WLAN connection.
Tip: To check the unique media access control
(MAC) address that identifies your device, enter
*#62209526# in the standby mode.
32

WLAN wizard

The WLAN wizard helps you to connect to a WLAN and
manage your WLAN connections.
See
The WLAN wizard shows the status of your WLAN
connections in the active standby mode. To view the
available options, scroll to the row showing the status,
and select it.
If the search finds WLANs, for example,
found is displayed, to create an internet access point
(IAP) and start the web browser using this IAP, select
the status and Start Web
If you select a secured WLAN network, you are asked to
enter the relevant passcodes. To connect to a hidden
network, you must enter the correct network name
(service set identifier, SSID). To create a new access
point for a hidden WLAN, select
If you are connected to a WLAN, the IAP name is
displayed. To start the web browser using this IAP,
select the status and
the connection in the WLAN, select the status and
Disconnect WLAN.
If WLAN scanning is off and you are not connected to
any WLAN, WLAN scanning off
scanning on and search for available WLANs, select the
status and press the scroll key.
WLAN network
browsing.
New WLAN.
Continue Web browsing. To end
is displayed. To set