Electrolux ESF 46010 User Manual page 31

Malfunction
The programme does not start
Once these checks have been carried
out; switch on the appliance and close
the dishwasher door.
The programme will continue from the
point at which it was interrupted.
If the message reappears in the
display contact the Service Force
Centre.
For other messages not described in
the chart, please contact your Service
Force Centre.
Contact your local Service Force
Centre, quoting the model (Mod.),
product number (PNC) and serial
number (S.N.).
This information can be found on the
rating plate located on the side of the
dishwasher door.
So that you always have these
numbers at hand, we recommend you
to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .
something not working electrolux 31
Possible cause and solution
The dishwasher's door has not been
properly closed. (Message «Close the
door» displayed)
Close the door.
The main plug is not plugged in.
Insert the main plug.
The fuse has blown out in the household
fuse box.
Replace the fuse.
Delay start has been set.
If dishes are to be washed immediately,
cancel the delay start.