Related Manuals for Electrolux ESF4600ROW
Summary of Contents for Electrolux ESF4600ROW
- Page 1 ..................... ESF 4600ROW EN DISHWASHER USER MANUAL...
-
Page 2: Table Of Contents
11. TECHNICAL INFORMATION ..........18 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. -
Page 3: Safety Instructions
ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • Do not use multi-plug adapters and ex- pliance, carefully read the supplied in- tension cables. structions. The manufacturer is not re- • Make sure not to cause damage to the sponsible if an incorrect installation and mains plug and to the mains cable. - Page 4 Contact the • Do not drink and play with the water in Service to replace the water inlet hose. the appliance. • Do not remove the dishes from the ap- 1.3 Use pliance until the programme is comple- ted.
-
Page 5: Product Description
ENGLISH 2. PRODUCT DESCRIPTION Worktop Water hardness dial Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket... -
Page 6: Control Panel
3. CONTROL PANEL On/off button Indicators Program button Programme bar Indicators Indicators Display Programme indicators Delay button TimeSaver button Option button Indicators Description Rinse aid indicator. It is always off while the programme oper- ates. Salt indicator. It is always off while the programme operates. -
Page 7: Programmes
ENGLISH Indicators Description Turbidity Sensor indicator. It comes on when the sensor for the AUTO programme operates. While the sensor operates, only the related indicator is on. All the other indicators, the display and the programme bar go off. They come on again when the Turbidity Sensor indicator goes off. -
Page 8: Consumption Values
Programme Degree of soil Programme Options Type of load phases Heavy soil Prewash TimeSaver Crockery, cutlery, Wash 70 °C EnergySaver pots and pans Rinses Normal or light soil Wash 45 °C EnergySaver Delicate crockery Rinses and glassware Fresh soil Wash 60 °C... -
Page 9: Options
ENGLISH 5. OPTIONS Activate or deactivate the options use separately detergent, rinse aid before the start of a programme. and dishwasher salt, do these steps: You cannot activate or deactivate 1. Deactivate the Multitab option. the options while a programme 2. -
Page 10: Before First Use
10 www.electrolux.com 3. Press and hold, at the same time, 2. Press and hold, at the same time, Program and Delay until the pro- Program and TimeSaver for a few gramme bar flashes quickly. seconds. 3. Press and hold, at the same time, De-... -
Page 11: Manual Adjustment
ENGLISH Water softener Water hardness adjustment German French mmol/l Clarke Manual Elec- degrees degrees degrees tronic (°dH) (°fH) 29 - 36 51 - 64 5.1 - 6.4 36 - 45 23 - 28 40 - 50 4.0 - 5.0 28 - 35 19 - 22 33 - 39 3.3 - 3.9... -
Page 12: Daily Use
12 www.electrolux.com 6.2 Filling the salt container Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt contain- er (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. -
Page 13: Setting/Starting Programme
ENGLISH 7.1 Using the detergent Press the release button (B) to open the lid (C). Put the detergent in the compartment (A) . If the programme has a prewash phase, put a small quantity of deter- gent on the inner part of the appli- ance door. -
Page 14: Hints And Tips
14 www.electrolux.com The cancelling of the delay start All the segments of the programme bar cancels also the set options (ex- are on with fixed light. cept Multitab). Make sure, before 1. Press the on/off button or wait for the... -
Page 15: Care And Cleaning
ENGLISH • To remove easily remaining burned • The filters are clean and correctly instal- food, soak pots and pans in water be- led. fore you put them in the appliance. • The spray arms are not clogged. • Put hollow items (cups, glasses and •... -
Page 16: Troubleshooting
16 www.electrolux.com To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). - Page 17 ENGLISH Problem Possible solution If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with Make sure that the water tap is open. water. Make sure that the pressure of the water sup- ply is not too low.
-
Page 18: Technical Information
18 www.electrolux.com 7. Adjust the released quantity of rinse Rinse aid dispenser off aid. Rinse aid dispenser on 8. Fill the rinse aid dispenser. 5. Press TimeSaver to change the set- ting. 6. Press the on/off button to deactivate the appliance and to confirm the set- ting. - Page 19 ENGLISH...
- Page 20 www.electrolux.com/shop...