Search Waypoint
Waypoints allow you to add an interim
"pit stop" while traveling to a
destination. For instance, you may want
to stop for gas or food, and then
continue on to your destination.
Although you can enter up to five
waypoints at a time, typically you may
never use more than one at a time.
Waypoints are routed to in the order
they were entered (number 1 first, etc.),
with your final destination routed to last.
If you wish to create a custom route of
several destinations, and then control
the order of routing, the function
"Today's Destinations" is probably a
better choice (see By Today's
Destinations on page 49).
When you enter waypoints, they appear
on the map screen as small red flags
numbered 1-5.
Driving to Your Destination
Adding Waypoint
From the MENU screen (Route), if you
say or select Search Waypoint, then
the Select a search method screen is
displayed. Select either Places Along
the Route or Places Around the
Destination.
Next, select your "Waypoint Category,"
then follow the menu prompts to select a
destination. When the system performs
a search from Places Along the
Route, it displays matches that lie
within a corridor on either side and in
front of you along your route.
Navigation System
75