Acura 2008 MDX Owner's Manual page 403

RADIATOR CAP COVER
1. Make sure the engine and radiator
are cool.
2. Remove the radiator cap cover.
Relieve any pressure in the cooling
system by turning the radiator cap
counterclockwise, without
pressing down.
RADIATOR CAP
3. Remove the radiator cap by
pushing down and turning
counterclockwise.
Engine Coolant
4. The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spill immediately; it
could damage components in the
engine compartment.
5. Put the radiator cap back on, and
tighten it fully.
CONTINUED
397