Acura 2008 MDX Owner's Manual page 131

When you remove the key from the
ignition switch, the steering wheel
automatically moves fully in and up.
To change the ''AUTO TILT &
TELESCOPE STEERING WHEEL''
setting, see page 99 .
The steering wheel then returns to
its original position when you insert
the key back in the ignition switch.
Steering wheel movement is also
controlled by the driving position
memory system (see page 157
If your vehicle's battery is
disconnected or goes dead, or the
fuse for the power tilt and telescopic
steering wheel is removed, the
power tilt and telescopic steering
wheel system needs to be reset
when you reconnect the battery or
install the fuse.
Insert the key into the ignition
switch, and remove it. The steering
wheel automatically moves fully in
and up to let you know the system is
reset.
).
Steering Wheel Adjustments
125