Acura 2008 MDX Owner's Manual page 105

Auto Tilt & Telescope Steering Wheel
When ''AUTO TILT & TELESCOPE
STEERING WHEEL'' is set to ''ON,''
the steering wheel automatically
moves fully in and up when you turn
the ignition switch to the LOCK (0)
position and remove the key.
You can choose this customize item
from ''POSITION SETUP'' by
pressing the INFO ( / ) button
repeatedly.
Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button.
Multi-Information Display
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ''SETTING INCOMPLETE''
message appears, go back to ''AUTO
TILT & TELESCOPE STEERING
WHEEL'' and repeat the procedure
again.
CONTINUED
99