Reference Documents - Z/Os; Configuring Ibm I5/Os; Configuration Overview - I5/Os - Xerox 6100BD - Phaser Color Laser Printer User Manual

Reference Documents - z/OS

Configuring IBM i5/OS

Configuration Overview - i5/OS

IPDS User Guide
Xerox FreeFlow® Print Server IPDS Network Connectivity Appendix
The following documents provide additional information on z/OS-
to-IPDS printer connectivity.
Table A-1. Reference Documents - z/OS
Title
Print Services Facility for z/OS: Customization
z/OS Communications Server IP Configuration
Reference
z/OS JES2 Initialization and Tuning Guide
z/OS JES2 Initialization and Tuning Reference
z/OS JES3 Initialization and Tuning Guide
z/OS JES3 Initialization and Tuning Reference
z/OS JES3 Hardware Configuration Definition (HCD)
User's Guide
z/OS Infoprint Server Customization
z/OS Infoprint Server Operation and Administration
IBM z/OS manuals are available on the IBM website.
This section describes the process of configuring an i5/OS system
to communicate and print on a Xerox FreeFlow Print Server IPDS
printer using TCP/IP on a System i series server.
Configuring the Xerox FreeFlow Print Server IPDS printer with
TCP/IP on the i5/OS system involves setting up 3 components:
1. IPS Manager System Configuration Menu (Refer to
Configuration).
NOTE: The printer IP Address is specified during the initial
software load. Set the TCP/IP port number in the IPS Manager
System Configuration dialog.
2. TCP/IP for i5/OS parameters (Refer to System i Networking
TCP/IP Setup)
Publication
Number
S550-0427
SC31-8776
SA22-7532
SA22-7533
SA22-7549
SA22-7550
SC33-7988
S544-5744
S544-5745
System
A- 3