Os/400 (Iseries) Setup - Xerox 3812 User Manual

Installation and setup

OS/400 (iSeries) setup

2-6
You must set several OS/400 parameters for resident outline font
support. If you do not set these parameters properly, jobs submitted
from OS/400 expecting resident outline fonts may fail or print blank
pages. If your host is an OS/400 and you require resident outline font
support, the recommended setup is:
•
On the OS/400 host, set the Resident Font parameter in the PSF
Configuration object to *YES.
•
In the DocuSP IPS Manager, ensure Enhanced Font Support is set to
Enabled.
•
In the DocuSP IPS Manager, load the AFP fonts using the Manage
Fonts Dialog.
Xerox DocuSP IPDS User Guide