Xerox 6100BD - Phaser Color Laser Printer User Manual page 25

IPDS User Guide
Using Xerox FreeFlow® Print Server IPS Manager
– Configuring the channel connection allows you to identify
the unit address and channel speed assigned to the print
server to send data to the IPS Manager from the host
computer.
NOTE: Channel modes are dictated by the host, host channel
extender speeds, and other properties of the bus and tag network.
See your systems programmer to determine the appropriate
channel speed.
• Offset Page After Printer Fault Clearance offsets one sheet in
the stack when printer fault occurs that requires clearing paper
from the paper path. The offset allows the operator to know
when the output was interrupted and to more easily check to
ensure job integrity after a printer fault.
• Use Gray For Color controls color simulation on monochrome
printers by using grayscales. If the option is disabled, any
IPDS objects calling for color will print as solid black. When
the option is enabled, IPDS objects calling for color will print
with a grayscale to simulate the color. This option is not
available on highlight color or full color printers.
• Shared Memory Space: The Shared Memory Space setting
indicates the size of the shared memory segment that will be
used by internal Xerox FreeFlow® Print Server IPDS
components.
Shared memory space ranges from 16-1024 MB. The default
value is 128 MB for monochrome printing systems, and 512
MB for color printing systems.
• Job timeout: Job timeout is selectable from 1-60 seconds, with
the default of 10 seconds.
• Printer Model: The IPS manager System Configuration dialog
enables you to choose between several IBM Group 3 printer
models. The available printer models are:
– 3812
– 3825
– 3827
– 3935
Any four-digit value may be entered in the text box; however,
Xerox FreeFlow® Print Server IPDS will only function in
accord with IPDS Group 3 printer protocols, regardless of the
stated printer model number. This printer model selection is
used to allow the system programmer or administrator at the
host to identify the system to the host as if it were a particular
IBM printer.
• Legacy Mode: When legacy mode is disabled, Xerox
FreeFlow® Print Server IPDS informs the host at startup that it
supports container objects in home state (i.e. between jobs),
even though the print server does not process the contents of
the object containers. Certain hosts, including the RS 6000
3- 3