Replacing The Module Cover - Dell Inspiron N7110 Service Manual

1 captive screw
3 tabs (3)

Replacing the Module Cover

1 Follow the instructions in "Before You Begin" on page 9.
2 Align the tabs on the module cover with the slots on the computer base
and gently snap the cover in place.
3 Tighten the captive screw that secures the module cover to the computer
base.
4 Replace the battery (see "Replacing the Battery" on page 16).
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
22
Module Cover
1
2 module cover
Before turning on the computer, replace all screws and ensure that no
2
3