1
display-cable connector
Replacing the Display Cable
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the display cable to the display-board connector and secure it
with the tape.
3 Turn the display panel over and place it on the display back cover.
4 Replace the display panel (see "Replacing the Display Panel" on page 94).
5 Replace the display bezel (see "Replacing the Display Bezel" on page 93).
6 Replace the display assembly (see "Replacing the Display Assembly" on
page 91).
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
96
Display
Before turning on the computer, replace all screws and ensure that no
2
1
2
tape