Table of Contents
Advertisement
Back to Contents Page
Module Cover
Dell™ Inspiron™ 1410 Service Manual
Removing the Module Cover
Replacing the Module Cover
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
Removing the Module Cover
1. Follow the procedures in
Before You
2. Turn the computer over.
3. Remove the two screws from the module cover.
1
module cover screw (2)
4. Lift the module cover away from the computer.
Replacing the Module Cover
1. Replace the module cover.
2. Replace the two screws on the module cover.
3. Slide the battery into the battery bay, until it clicks into place.
Back to Contents Page
Begin.
2
module cover
Advertisement
Table of Contents
