Install The Printer Software - Lexmark Z51 Color Jetprinter Getting Started Manual

6
Install the printer
software
Before you install the printer software, make sure you
shut down all running applications.
To install the printer software, follow the steps for
your operating system:
Windows 95, 98, and NT 4.0:
1
Make sure your computer is on and Windows is
running.
IMPORTANT: If Windows displays a message
indicating your printer has been found, select
Cancel. If the Update Device Driver Wizard
appears, select Cancel.
2
Insert the Lexmark Z51 Color Jetprinter CD
into your CD-ROM drive.
• If the Lexmark Z51 Printer Software menu
screen appears after a few moments, continue
with step 3.
• If nothing appears on the screen after a few
moments, follow these instructions:
a
From the Start menu, choose Run.
b
In the Open: text box, type the letter of
your CD-ROM drive, followed by
(for example, d:\setup), then click OK.
3
When the Lexmark Z51 Printer Software menu
screen appears, click the
button.
4
Follow the instructions on your screen.
7
:\setup
Install Printer Software