Connecting The Dishwasher; Water Connection; Permitted Water Pressure; Connect The Inlet Hose - AEG 60750 VI User Instructions

Installation and Connection Instructions

Connecting the Dishwasher

Water Connection

The dishwasher is fitted with safety devices that prevent the return of
wash water into the drinking water system and comply with the appli-
cable plumbing regulations.
• The dishwasher should be connected to a cold water supply.
• The dishwasher should not be connected to a hot water supply.

Permitted water pressure

Lowest permitted water pressure:
1 bar (=10N/cm2 =100 kPa)
Highest permitted water pressure:
10 bar (=100 N/cm2 =1 MPa)

Connect the inlet hose

The water inlet hose must not be kinked, crushed or entangled when it
1
is being connected up.
Connect the threaded hose fitting (DIN 259) on the water inlet hose to
0
a tap with an external thread (¾ inch). Handtighten the threaded hose
fitting only.
• In order that access to the tap in the kitchen is not limited by the use
3
of the dishwasher, we recommend the installation of an additional
tap, or the fitting a two way adapter to the existing tap.
• If you need a longer water inlet hose contact your local AEG Service
Force Centre.
34
For a water pressure of less than 2 bar
please seek advice from AEG Service
Force.
In the case of a water pressure greater
than 10 bar, a pressure reduction valve
must be used (available from your
dealer).