Warning Tones Indicating A Fault In The Dishwasher - AEG 60750 VI User Instructions

...Warning Tones Indicating a Fault in the Dishwasher.

• If one or two repetitive warning tones can be heard after the start of
a programme, they indicate a fault in the dishwasher that you can
probably rectify yourself. The door of the dishwasher is automatically
unlocked when the tones sound.
After rectifying the fault, press the button for the wash programme
that has been started and close the door of the dishwasher. The wash
programme should continue.
If the same warning tone is heard again, please contact AEG Service
Force.
• If more than two repetitive warning tones are heard after the pro-
gramme start, please contact AEG Service Force. The Service Centre
will need to know the number of tones and which indicators on the
control and display field are flashing.
Symptom
1 warning tone that is
repeated continuously can
be heard and the END indi-
cator and the programme
display on the
control and display field are
flashing.
The WATER indicator is per-
manently illuminated.
2 warning tones that are
continuously repeated can
be heard and the DRYING
indicator on the control and
display field is flashing.
3 warning tones that are
continuously repeated can
be heard and the DRYING
and END indicators on the
control and display field are
flashing.
Possible Cause
Tap is closed.
The filter (where
present) in the threaded
hose fitting is blocked.
The water inlet hose is
not correctly laid.
The siphon is blocked.
The water drain hose is
not correctly laid.
The leak prevention sys-
tem has been triggered.
Operating Instructions
Remedy
Open tap.
Clean the filter in the
threaded hose fitting.
Check hose installation.
Clean siphon.
Check hose installation.
Close the tap and contact
AEG Service Force.
29