Belkin F1DA116Z - OmniView PRO3 USB User Manual page 43

Troubleshooting
USB
I am connecting the USB Cable Kit to a USB server, and my keyboard
and mouse do not work.
• Prior to connecting the PRO3 KVM Switch, make sure that the HID USB driver
is installed on each server. (To install the HID USB driver, connect a USB
mouse and USB keyboard to the server. A Windows operating system should
automatically install the drivers.)
Some of the keys on my keyboard are not functioning properly when I
use a Mac server.
• If you are using a PC keyboard on a Mac system, a few of the option keys on
your PC keyboard may be reversed. All major keys will function as labeled.
Refer to the "Sun Combo and Mac Key Mapping" section in this User Manual.
Apple startup keys such as C (to boot from CD), N (to boot from
®
network), and F8 (to enter partition boot select menu) do not work.
1
2
3
4
5
6
7
8
41