Connecting Servers To The Pro3 Kvm Switch - Belkin F1DA116Z - OmniView PRO3 USB User Manual

Installation

Connecting Servers to the PRO3 KVM Switch

(PS/2 Connection):
Step 1
Make sure your server is powered off.
Step 2
Using the Belkin Dual-Port Micro-Cable Kit for PS/2 (F1D9400-XX), connect the
VGA connector to the monitor port on your server. (Refer to diagram below.)
Step 3
Connect the PS/2 mouse and keyboard connectors to the mouse and keyboard
ports on the server. (Refer to diagram below.)
16 16