Table of Contents
Advertisement
Antenna terminals
An F-type FM antenna cable plug can be connected directly.
Direction of broadcasting station
AM loop antenna
(supplied)
AM outdoor antenna
n
AM loop antenna assembly
Connect to the AM
antenna terminals.
Remove the vinyl tie and take
out the connection line.
a. With the antenna on top of
any stable surface.
Mount
Installation hole Mount on wall, etc.
FM antenna
75 Ω/ohms
Coaxial cable
FM indoor antenna
(supplied)
1. Push the
Ground
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
• Make sure the AM loop antenna lead terminals do not
Bend in the reverse direction.
touch metal parts of the panel.
Note to CATV system installer:
b. With the antenna attached
This reminder is provided to call the CATV system
to a wall.
installer's attention to Article 820-40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
Connection of AM antennas
2. Insert the
3. Return the
lever.
conductor.
lever.
ENGLISH
Advertisement
Table of Contents
