Advertisement
LG IP Phone Turn-up Summary for New Installs*
Covad offers several stream-lined ways to provision LG IP phones on our network, depending upon the type of circuit.
Phone Location
1. Managed For
LG IP Phone
new/adds to
Configuration
sites using DHCP
using DHCP
with broadband
- see slides 3-8
connection to
Covad
2. Manual
LG IP Phone
Method. For
Configuration –
adds to existing
Manual Method
Managed sites
- see slides 9-14
where DHCP not
implemented
Unmanaged
Not a supported application with LG phones
Sites
*--Working phones must not have their TFTP server address changed (i.e., from 64.2.21.251 to 64.2.21.x) as this may impact
phone operation.
2
Configuration
Document
If phone is used, erase configuration
Plug phone in to network. 5 minute auto
load!
At "0000" invoke *51 procedure to bind
number to phone
Configure phone IP settings via manual
configuration
Plug phone into network
At 0000, invoke *51 procedure to bind
number to phone
Overview of
Local Configuration Steps
Covad Confidential
Description of what happens to
phone
Gets IP address via DHCP from CPE
router
Gets VoIP settings, latest/current
firmware from new TFTP server at:
64.2.21.251 (Sunnyvale)
64.2.21.45 (San Jose)
68.165.105.181 (Sunnyvale2)
72.245.184.75 (DC)
Extension bound to MAC address
Gets IP address as manually
configured
Gets basic VoIP settings,
latest/current firmware from new
TFTP server at:
64.2.21.251 (Sunnyvale)
64.2.21.45 (San Jose)
68.165.105.181 (Sunnyvale2)
72.245.184.75 (DC)
Extension bound to MAC address
Advertisement
