Alpine TME-M710 Owner's Manual page 16

4
Remove the main unit from the stand.
5
Remove the mount from the stand and stick it to
the dashboard etc..
Remove any dirt on the place to install, using the
supplied cloth.
If the place of
attachment is
curved, then
bend this part
to match the
shape.
• If the temperature in the car is low (Winter), then first
heat up the place where you are going to stick the
mount with a hairdryer etc.
• Do not apply force to the mount, or expose to
humidity, within 24 hours after attaching.
• If the mount is not firmly stuck, then we recommend
that you attach with the supplied fixing screws.
6
Attach the main unit to the stand as shown in step
2.
Use the cable clamps to fix the cables.
• Before using, check that the main unit and the stand,
and the stand and the place where it is attached to
the car are fixed securely.
Fixing screws
(M4 x 12 Supplied)
Mount
15
-EN