Configuring Traffic Data On The Map Page - Garmin GTS 800 Pilot's Manual Addendum

1.13 CONfIGURING TRAffIC DATA ON THe MAP PAGe

Traffic is only displayed on the Map Page if aircraft heading data is available. The
Traffic Mode setting allows the operator to choose which traffic type is displayed (all
traffic, traffic and proximity advisories, or traffic advisories only). The Traffic Symbol
and Traffic Label settings determine the maximum ranges at which these items are
displayed.
Configuring traffic on the Map Page:
1) Turn the small right knob to select the Map Page.
2) Press the MENU Key to display the Page Menu.
3) Turn the small right knob to select 'Setup Map?'.
4) Press the ENT Key. The flashing cursor highlights the GROUP field.
5) Turn the small right knob to select 'Traffic'.
6) Press the ENT Key (Figure 9).
7) Turn the large right knob to select the desired Traffic Mode option.
8) Turn the small right knob to select the desired option.
9) Press the ENT Key. Repeat steps 7-9 for Traffic Symbol and Traffic Label.
10) Return to the Map Page by pressing the CLR Key.
190-00140-78 Rev. A
Figure 9 Traffic Setup Menu
400/500 Pilot's Guide Addendum for GTS 8XX Interface
GTS 8XX Interface
11