Remote Control - Haier HLT10 Instruction Manual

BACK VIEW
NOTE: You must connect external antenna to the unit before TV receiver operation.

REMOTE CONTROL

1.MUTE-To mute the sound.
BUTTONS-To input channel
2.NUMERIC
numbers directly.
3. -/-- BUTTON-Used to directly input TV
channels with double digits.
4.PAGE UP( Text mode only)
5.PAGE DOWN(Text mode only)
6.CH+-To select next channel.
7.CH- -Toselect previous channel.
8.VOL+ -To adjust volume louder.
9.VOL- -To adjust volume lower.
10.TV/AV-To switch the signal source
between TV and AV IN.
11.SCALE-To switch the display between
16:9 and 4:3 mode.
12.MENU -Display the main menu. Press it
can also return to previous menu in menu
setup page.
13.STANDBY-To set the TV in standby mode;
press it again to switch it on.
14.SLEEP-To set the sleep time.(The TV will
be in standby mode automatically in a period
of time you set.)
15.MTS-To change the soundtrack .
16.AUDIO-To select the audio mode.
17.CHRTN-To return to previous program you
watched.
-To enter the picture mode, keep
18.PIP ( Picuure )
pressing it to select one as desired.
BATTERY COVER ( KNOCK DOWN ) - INSIDE rechargeable
WITH RECHARGEABEL LITHIUM BATTERY Lithium battery
STAND HOLDER
6
5. LOCK ( PARENTAL LOCK ) -
channels which one are rated above these viewing age.
- Press the left or right button to select the LOCK icon, then it will display as follow:
-Press the up or down button to select the ENTER PASSWORD, then input the password
0000, the screen will display as follow:
5.1Change Password
It is used to change the password, and the procedure of changing password is described as followings:
Enter old password in the OLD PASSWORD row
Enter new password in the NEW PASSWORD row
Enter the new password again in the CONFIRM PWD row
Press OK button on the screen to return to the Password Setup Page, then the Password has been
changed.
NOTE: The original password is 0000, you can change it, but you should write it down and keep it safe.
If you forget the password, please use the original password:0000.
5.2 System Lock
-Press up or down button to select System Lock ,press left or right button to switch it ON or OFF
ON: Turn on the system setting ,then you can set the Unrated Lock, US, CANADA TV program and
Reset RRT.
OFF:Turn off the system setting, you can not set all selections.
5.3 Unrated Lock
There are some channels need rate, this selection can turn on or turn off the Unrated channel.
-Press up or down button to select Unrated Lock ,press left or right button to switch it ON or OFF
5.4 US (The United States)
Press up or down button to select US, press right button to enter it then you can setting the TV program
rating ,the yellow cursor is which one you selected, press ENTER to confirm it then there will a lock icon
in it and all the levels which below it; and MPAA (you have set a Parental Control .There are seven
different settings from"x"to "NC-17" which you can choose).
5.5 CANADA(The Canada )
Press up or down button to select Canada ,press right button to enter it then you can setting the TV
program, and you have set a Parental Control .There are seven different settings from"E"to "18+" which
you can choose the levels.
5.6 Reset RRT
This will go back to the default factory settings.
Allow you to set up the unit from children watching
19