Accessories; Optional Accessories - Brother XR-65T User Manual

1 X59370-051
3 X57117-051
5 XA4911-151
7 130012-054
9 X59476-051
A X55467-051
C XA3442-151
1 SA107
XA8319-002
3 SA125
X80980-002
3
2 SA156
XA5539-051
4 X57521-001
6 SA144
XA7650-002
8 130013-054
< 130920-051
B X54243-001
D X52769-656
2 SA129
X81021-002

ACCESSORIES

1 Zipper Foot (1 pc.)
2 Bobbin (3 pcs.) SA156 (For U.S.A)
XA5539-051 (For other countries)
Replacements (10-piece set)
3 Needle Pack (Regular Single Needle No. 14) (3 pcs.)
4 Twin Needle (1 pc.)
5 Buttonhole Foot (1 pc.)
6 Clear-view Foot (1 pc.)
SA144 (For U.S.A)
XA7650-002 (For other countries)
7 Spool Cap (Large) (1 pc.)
8 Spool Cap (Small) (1 pc.)
9 Cleaning Brush (1 pc.)
0 Extra Spool Pin (1 pc.)
A Screwdriver (1 pc.)
B Seam Ripper (1 pc.)
C Darning Plate (1pc.)
D Hard Case (1 pc.) (Model XR-46)
Parts Code for Zigzag Presser Foot: X51953-051
Parts Code for Spool Cap (Medium): X55260-153
Foot Controller: Model N
Parts Code: J00360-051 (110/120V Area)
XA6400-051 (220/240V Area)
XA6402-051 (U.K.)
XA6404-051 (Australia, New Zealand)
XA6434-051 (110/220V Dual Ara)
NOTE (For U.S.A. only):
Foot Controller: Model N
Parts Code: J00360-051 (110/120V Area)
This foot controller can be used for Model XL-6562, XL-6452, XR-
46.
The above accessories are stored in the flat bed attachment. These
accessories have been designed to help complete most sewing
tasks.

Optional Accessories

1 Walking Foot SA107 (For U.S.A)
XA8319-002 (For other countries)
2 Springaction Quilting Foot
SA129 (For U.S.A)
X81021-002 (For other countries)
3 1/4-Inch Quilting Foot
SA125 (For U.S.A)
X80980-002 (For other countries)
NOTE:
The content of accessories depends on model.