Table of Contents
Advertisement
Available languages
Available languages
Electrical
Shock Hazard
Electrically
ground dishwasher.
Connect ground
wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow
these instructions can result in
death, fire, or electrical shock.
Form bare ground
wire into a U-shaped
hook. Wrap
ground
wire hook clockwise
around ground
connector
screw and under the washer. Securely
tighten
ground
connector.
NOTE: Twist on UL listed or CSA approved
wire
connector.
Gently tug on wires to be sure both are
secured.
Connect wires black to black and white to white, using
UL listed or CSA approved
twist-on
wire connectors
(not
included).
b Iack -_e------e_ bIack
ground Wire _
ground Connector
If needed, see website
for animated
representation
of this step. Visit www.maytag.com/electrical
under FAQ
tab.
Tighten strain relief screws to secure cable.
Place wires inside terminal
box. Insert tabs
on left side of cover. Make sure wires are tucked inside box.
Close cover ensuring wires are not pinched. Use 1/4" nut
driver and previously
removed screw to secure cover.
18
Advertisement
Table of Contents
