Olympus SZ-14, SZ-12 Instruction Manual page 48

Adjusting the image processing Adjusting the image processing
function [Pixel Mapping] function [Pixel Mapping]
s (Settings 2)
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
To adjust the image processing function To adjust the image processing function
Press the A button when [Start] (Submenu 2) is
displayed.
●
The check and adjustment of the image processing
function starts.
Playing back images on a TV [TV Out] Playing back images on a TV [TV Out]
s (Settings 2)
Submenu 2
NTSC
Video Out
PAL
480p/576p, 720p,
HDMI Out
1080i
Off
HDMI Control
On
The factory default settings differ according to the region where the camera is sold.
48 EN
Pixel Mapping
TV Out
Submenu 3
Connecting the camera to a TV in North America, Taiwan, Korea, Japan,
and so on.
Connecting the camera to a TV in European countries, China, and so on.
Set the signal format to be given priority. If the TV setting does not match,
it is changed automatically.
Operate with the camera.
Operate with the TV remote control.
Adjusting the brightness of the monitor Adjusting the brightness of the monitor
[ [ s s ] ]
s
s (Settings 2)
To adjust the monitor brightness To adjust the monitor brightness
1 Use FG to adjust the brightness while viewing the
screen, and then press the A button.
Application
s
Back MENU Set OK