Getting Started
Replacement Part Kit Contents
• Keep uninstalled printed circuit boards in their protective antistatic bags.
• Once you have removed printed circuit boards from their protective antistatic bags,
handle the printed circuit boards by their edges only.
Replacement Part Kit Contents
Take a moment to verify that your kit contains the following contents:
• System board upgrad tray assembly
• Electrostatic Discharge (ESD) materials
• Removal/Replacement Instructions
If you are missing any part or any documentation, please call your designated service
representative.
Required Tools
You will need the following tools for removal/replacement procedures:
• Light-duty flat blade screwdriver with 6-inch (150 mm) blade
• T-15 and/or T-20 Torque drivers
• ESD materials
• Sufficient ESD protected surfaces on which to lay out parts
4
Chapter 1