Fixing Assembly - Canon PC920 Service Manual

A.

Fixing Assembly

1. Construction
Caution:
1. The fixing film is made from a spe-
cial material. Do not touch it or sub-
ject it to dust.
2. The machine does not have a mecha-
nism used to adjust the roller pres-
sure.
2. Removing the Fixing Assembly
1) Remove the front lower cover.
(See Chapter 7.III.A.2."Removing the
Front Lower Cover.")
2) Remove the screw [1], and free the two
hooks [2]; then, detach the power supply
cover [3].
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
[5]
[1] Fixing heater
[2] Fixing film
[3] Inlet guide
Figure 6-201
[1]
[3]
Figure 6-202
[1]
[2]
[4] [3]
[4] Fixing lower roller
[5] Cleaning roller
[2]
6-11