Table Of Contents - Viking RDGSU2005B Installation Manual

D3 series built-in gas cooktops
Hide thumbs Also See for RDGSU2005B:
Table of Contents

Advertisement

Table of Contents

Warnings & Important Safety Instructions _______________________________________________3
Dimensions _________________________________________________________________________6
Specifications _______________________________________________________________________7
Cutout Dimensions __________________________________________________________________8
Downdraft Dimensions ______________________________________________________________9
Clearance Dimensions (Proximity to Cabinets)__________________________________________10
Clearance Dimensions (Wood/Composite Overlay) _____________________________________11
Electrical & Gas Requirements _______________________________________________________12
General Information ________________________________________________________________14
Installation _________________________________________________________________________15
Gas & Electrical Connection ______________________________________________________15
Bracket Installation ______________________________________________________________16
Final Installation ________________________________________________________________16
Final Preparation ___________________________________________________________________17
Performance Checklist ______________________________________________________________17
Service & Registration _______________________________________________________________18
2
IMPORTANT
-
Please Read and Follow
• Before beginning, please read these
instructions completely and carefully.
• DO NOT remove permanently affixed
labels, warnings, or plates from product.
• All local and national codes and
ordinances must be observed. Installation
must conform with local codes or in the
absence of codes, the National Fuel Gas
Code ANSI Z223.1 NFPA54-latest edition.
• The installer must leave these instructions
with the consumer for local inspector's use
and for future reference.
Installation of any gas-fired equipment
should be made by a licensed plumber. A
manual gas shut-off valve must be installed
in the gas supply line ahead of the cooktop
in the gas stream for safety and ease of
service.
In Canada: Installation must be in
accordance with the current CAN/CGA
B149.1 & 2 Gas Installation codes and/or
local codes. Electrical installation must be in
accordance with the current CSA C22.1
Canadian Electrical Codes Part 1 and/or
local codes.
In Massachusetts: All gas products must be
installed by a "Massachusetts" licensed
plumber or gasfitter. A "T" type handle
manual valve must be installed in the gas
supply line to the appliance.
An air curtain or other overhead range hood
which operates by blowing a downward
airflow onto the range, shall not be used with
a gas appliance
3
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. ALWAYS read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be preceded by
the safety alert symbol and the word
"DANGER," "WARNING" or "CAUTION."
These words mean:
DANGER
Hazards or unsafe practices
which WILL result in severe personal
injury or death
WARNING
Hazards or unsafe practices
which COULD result in severe personal
injury or death
CAUTION
Hazards or unsafe practices which
COULD result in minor personal injury
or property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.

Advertisement

Table of Contents
loading

Table of Contents