76 Configuring Symantec Mail Security for SMTP
Configuring queue file save and SMTP conversation logging
To configure conversation logging
1
On the Symantec Mail Security for SMTP administrative interface, in the
left pane, click Configuration.
2
On the Diagnostics tab, under SMTP Conversation Logging, in the logging
drop-down lists, select one of the following for the conversation logging
level:
Disable: No conversation logging is performed.
■
Save log on error: Conversation logs are saved only if an SMTP error
■
occurs during the message transmission.
Log all inbound (or outbound) traffic: All conversation logs are saved
■
for inbound or outbound conversations.
3
On the Diagnostics tab, under SMTP Conversation Logging, in the logging
drop-down lists, select one of the following to determine error type triggers:
All SMTP errors: All SMTP errors are logged.
■
Communication error: Network and socket errors are logged.
■
Protocol error: Failures to follow defined SMTP protocols (such as a
■
command out of sequence or bad syntax) are logged.
Local processing error: Application-defined errors (such as a message
■
that exceeds defined size limits) are logged.
Unsupported operation: Requests for unsupported operations (such as
■
TURN) are logged.
4
On the Diagnostics tab, under SMTP Conversation Logging, in the logging
drop-down lists, select one of the following to determine the level of DATA
stream logging:
Ignore DATA stream: Only the DATA command is logged.
■
Summarize DATA stream: A line count and byte count summary of the
■
DATA stream is logged.
Echo DATA stream: The entire DATA stream is logged.
■
For outbound messages, the DATA stream is buffered. (The line count
and byte count of the DATA stream for outbound messages will not
match the line count and byte count for inbound messages.)