Symantec 11105111 - SYM MAIL SEC SMTP 5.0 SMS PORT MEDIA CD EN User Manual page 66

66 Configuring Symantec Mail Security for SMTP
Configuring routing options
4 Under Destination relay, in the Host box, type the host name, IP address, or
domain of the mail server to which email that is destined for the server that
is designated under Routed host or domain should be routed.
In most cases, using an IP address is preferable to using a host name
because a host name needs to be resolved.
If you type a destination host, email that is addressed to a user who is
receiving mail at the host that is listed under Routed host or domain will be
relayed using the host that is designated in the Host box under Destination
relay.
5 In the Port box, type the port number for the mail server.
The default port number is 25.
6
Click Save.
To edit a local routing list entry
1 On the Symantec Mail Security for SMTP administrative interface, in the
left pane, click Configuration.
2 On the Routing tab, under Local Routing List, select the case that you want
to edit.
3 Click Edit.
4 Make the changes that you want.
5 Click Save.
To delete a local routing list entry
1 On the Symantec Mail Security for SMTP administrative interface, in the
left pane, click Configuration.
2 On the Routing tab, under Local Routing List, select the case you want to
delete.
3 Click Delete.