Table of Contents
Advertisement
22
G
S
ETTING
TARTED WITH PC
Incorrect IP Address
for the Call Processor
NBX Packet Driver
Error (Windows NT
Only)
X
SET
applications at once. Play a wave file in one application while recording in
another application. If you get an error message, your audio card does
not support full-duplex audio.
Solution
Use a USB audio headset.
The following message appears during pcXset startup or after you click
Test on the IP Info tab of the Configuration Wizard.
Error code: [80043002H] Error Message: XXXXX Context: XXXXX
This error has occurred in the Winsock subsystem. Please
check your IP configuration. Especially your NCP IP address.
A similar message may appear in the log file:
ERROR: XXXXX [80043002H]
This error has occurred in the Winsock subsystem. Please
check your IP configuration. Especially your NCP IP address.
Description
The Winsock call connect, used to determine the correct local interface
during Auto IP determination, received the error. This error normally
occurs if pcXset has an incorrect IP address for the Call Processor or
cannot connect to that Call Processor due to network problems.
Solution
1 Verify the Call Processor IP address. See
Software"
for more information.
2 Verify the network connection by pinging the Call Processor from the
DOS prompt.
The following message appears during pcXset startup:
Error code: [80046000H] Error Message: XXXXX Context: XXXXX
This error has occurred in the Communications object. Please
contact your technical support representative.
A similar message may appear in the log file:
"Configuring the pcXset
Advertisement
Table of Contents
