Table of Contents
Advertisement
Chapter 3. Using the Monitor
Note: The complete monitor manual is available at http://www.osdmanual.com. Match the OSD displayed
when the Menu button is pushed with one of the OSD choices on the website.
When using the monitor, observe the following basic guidelines:
v Never insert anything metallic into the openings in the cabinet of the LCD monitor; doing so can create
the danger of electric shock.
v To avoid electric shock, never open the LCD monitor case. The case should only be opened by trained
service personnel.
v Never use your LCD monitor if the power cord has been damaged. Do not allow anything to rest on the
power cord or pinch the power cord.
v Be sure to hold the plug, not the cord, when disconnecting the LCD monitor from an electric socket.
v Openings in the LCD monitor case are provided for ventilation. To prevent overheating, these openings
should not be blocked or covered. Install the unit in a well-ventilated area.
v Place your LCD monitor in a location with low humidity and a minimum amount of dust.
v If the LCD monitor accidentally gets wet, unplug it and contact your IBM representative or reseller
immediately. You can clean the LCD monitor with a damp cloth when necessary, but be sure to unplug
the LCD monitor first.
v Place the LCD monitor on a solid surface and treat it carefully. The screen is made of thin glass with a
plastic front surface and can be damaged if dropped, hit, or scratched. Do not clean the front panel with
ketone-type materials (for example, acetone), ethyl alcohol, toluene, ethyl acid, methyl, or chloride.
These materials might damage the monitor.
v Locate your LCD monitor near an easily accessible ac outlet.
v If there are any unusual sounds or smells coming from your LCD monitor, unplug it immediately and
contact your IBM representative or reseller.
v High temperature can cause problems. Keep your LCD monitor away from direct sunlight, heaters, and
other sources of heat.
v Unplug your LCD monitor when it is going to be left unused for an extended period of time.
v Unplug your LCD monitor from the ac outlet before any service.
v The maximum operating ambient temperature is 40°C.
v Connect the mouse (touchpad, pointer) and keyboard only to listed Information Technology Equipment
(ITE) with Limited Power Source (LPS) keyboard and mouse (touchpad, pointer) outputs.
User Controls
These controls available on the front of the monitor:
Activates the auto adjustment function. The Auto adjustment is being processed message is
Auto
displayed.
Exit
Exits the OSD (On-screen display) function or returns to the previous menu.
Power Indicator
Indicates the status of monitor operation.
Green Normal
Black Power OFF
Amber
Power saving mode or disconnection of signal cable
Power Button
Turns on and off the monitor power.
13
Hide quick links:
Advertisement
Table of Contents
