About Recording Tv To The Hp Media Drive - HP IQ506 - TouchSmart - 4 GB RAM Manual

28
Watching and Recording TV
4 Under Record on drive, select the HP Media Drive, and then click Save. A
Recorded TV folder is created and placed in the HP Media Drive. Recorded TV
programs must be placed in this folder for you to access them by using Windows
Media Center.
NOTE: You must close Windows Media Center before removing or connecting the
HP Media Drive for the stored TV files to update properly.
5 Under Record on drive, select the local hard disk drive, and then click Save.
6 Move or copy your recorded TV programs to the Recorded TV folder on the HP Media
Drive. Now, you can view your stored TV programs in Windows Media Center, or
you can double-click the file and view the program in Windows Media Player.
7 Close Windows Media Center before disconnecting the drive.
When you connect the drive, stored TV files appear a few seconds after you open
Windows Media Center.

About recording TV to the HP Media Drive

The computer is set up to record TV programs to the local hard disk drive when you use
Windows Media Center. It is possible to change the recording path to an HP Media Drive
(purchased separately), but several errors can occur if the drive is unexpectedly or
improperly removed.
It is recommended that you record TV programs to the local hard disk drive and then copy
the files over to an HP Media Drive.
If you decide to change the recording path to the HP Media Drive, consider the following:
The TV recording path does not revert to the local hard disk drive after the HP Media
Drive is disconnected. This means that scheduled recordings might not be recorded. If
the recording message Low Disk Space appears, the program will not be recorded.
See "Changing disk space for recording TV programs" for more information about
changing the hard disk space settings.
When the drive is disconnected, the disk allocation for recorded TV programs reverts
to 10%, and your recorded programs can be lost if you have selected the Keep until
space is needed setting. See "Changing disk space for recording TV programs" for
more information about changing the allocation.
If you disconnect the drive while live TV is active, a video error can occur.
Recorded TV programs are not updated in Windows Media Center when the drive is
removed.
The drive might be assigned a different drive letter, which prevents Windows Media
Center from recognizing the recording path or the stored recorded TV files.
When you set the TV recording path to the HP Media Drive, Windows Media Center
stores the recording buffer data for pausing live TV on the drive. This means that if live TV
is playing, you won't be able to remove the drive safely.
To avoid this scenario, change the recording path back to the local hard disk drive, and
then restart the computer before disconnecting the HP Media Drive.