Thread Trimming Lock - Brother S-7200C Instruction Manual

8. USING THE G10 OPERATION PANEL (ADVANCED OPERATIONS)

8-4. Thread trimming lock

Thread trimming not locked
Thread trimming is carried out.
<Setting method>
* This setting cannot be carried out if the lock function is on. (For details on turning the lock function off, refer to "8-7.
Lock function".)
1 Activating setting mode
(While pressing the end backtack key, press the power ON switch.)
2 Selecting "trdi" (thread trimming lock)
(Press three times)
Enabling and disabling thread trimming lock
3
4
5
37
Thread trimming is carried out.
(Setting item)
(Setting value)
(Setting item)
Setting mode will be exited and normal operation will be possible.
Thread trimming is not carried out.
3658M
(Setting item)
・ When the
display will appear.
・ When the
display will appear.
Thread trimming locked
...
Thread trimming not locked
...
NOTE:
If the start backtack key (1) is pressed once
more, the start backtack indicator will switch
off and the display will return to the setting
item.
The setting will be stored and the display will
return to the setting item.
S-7200C
Thread trimming locked
Thread trimming is
not carried out.
key is pressed, the "on"
key is pressed, the "oFF"
4208M 2138M 2139M
3659M
4203M
4212M
4213M
4206M