Brother S-7200B Instruction Manual page 37

7
Selecting "Thread trimming not locked" and "Thread trimming locked"
(For example 1: Thread trimming locked)
8 Exiting setting mode
Refer to the next page for details on sewing "Start and end backtacking" or "Continuous backtacking".
7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS)
0: Thread trimming not locked (normal)
1: Thread trimming locked
1. Press the start backtack key (2) so that "T" is displayed in
the top row of the stitch number display.
2. Press the end backtack key (3) to set either "Thread
trimming not locked" or "Thread trimming locked" in the
bottom row of the stitch number display
Set the power switch (1) to OFF.
S-7200B
T: Thread trimming setting
.
3664M
3665M
30