Configuring Rate Limits For Packets That Reach The Supervisor - Cisco 7206 - VXR Router Configuration Manual

Configuring the Basic Interface Parameters
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
--------------------------------------------------------------------------------
Interface
-------------- ----- ---- -------------- ------------------- ------- -----------
Eth3/1
n7000# show interface ethernet 3/12 cable-diagnostics-tdr
--------------------------------------------------------------------------------
Interface
-------------- ----- ---- -------------- ------------------- ------- -----------
Eth3/12

Configuring Rate Limits for Packets that Reach the Supervisor

Beginning with Cisco NX-OS Release 5.1, you can configure rate limits globally on the device for
Note
packets that reach the supervisor module. For more information, see the Cisco Nexus 7000 Series NX-OS
Security Configuration Guide, Release 5.x.
You can configure rate limits for packets that reach the supervisor module on a particular interface.
SUMMARY STEPS
1.
2.
3.
4.
5.
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
2-52
Speed Pair Cable Length
auto ---
---
---
---
Speed Pair Cable Length
1000 ---
---
---
---
configure terminal
[no] rate-limit cpu direction {input | output | both} pps packets action log
(Optional) exit
(Optional) show system internal pktmgr interface ethernet slot/port
(Optional) copy running-config startup-config
Distance to fault
N/A 1 +/- 2 m
N/A 1 +/- 2 m
N/A 1 +/- 2 m
N/A 1 +/- 2 m
Distance to fault
N/A N/A
N/A N/A
N/A N/A
N/A N/A
Chapter 2 Configuring Basic Interface Parameters
Channel Pair Status
Pair A
Pair B
Pair C
Pair D
Channel Pair Status
Pair A Terminated
Pair B
Pair C
Pair D
Open
Open
Open
Open
Terminated
Terminated
Terminated
OL-23435-03