Brother RH-9820 Instruction Manual page 49

4
Select the parameter number (2) for the parameter that you would like to change. (Refer to "5-3-1. Parameter list".)
0413B
5
Change the setting (3) for the parameter.
0414B
6
Apply the changed setting.
0415B
7
Repeat steps 4 - 6 above to change other parameters.
Shortcut keys
0416B
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
(2)
* The flashing display means that the setting has not yet been applied.
* You can make the initial setting appear in the display by pressing the RESET
key.
* The display will change from flashing to illuminated, and this means that the
setting has been applied.
* You can cancel the setting change by pressing the
MANUAL key without pressing the ENTER key.
The shortcut keys have the following six often-used parameters registered
into them.
•
You can retrieve a desired parameter simply by pressing the
corresponding shortcut key.
•
These operations can be carried out from any mode (automatic,
manual, test and program mode) except cycle program mode.
(4) Sewing speed (Parameter No. 01)
(5) Sewing length (Parameter No. 02)
(6) Cutting spacing (Parameter No. 03)
(7) Stitch pitch (Parameter No. 04)
(8) No. of eyelet stitches (Parameter No. 05)
(9) Bartack length (Parameter Nos. 06, 08, 10)
*
: Loads the parameter number corresponding to the bartack shape for
parameter No. 40.
RH-9820
(3)
Flashes
Illuminates
, , AUTO, TEST or
*
0316B
0317B
0317B
40