External Component Operations (Only For Kd-Ar300); Playing An External Component - JVC G300 - KD Radio / CD Instruction Manual

EXTERNAL COMPONENT OPERATIONS
This section is only for KD-AR300.

Playing an external component

You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See "To select the external component to
use—EXT IN" on page 26.
1
Select the external component
(LINE IN).
• If "LINE IN" does not appear on the display, see
page 26 and select the external input ("LINE IN").
Note on One-Touch Operation:
When you press CD CD-CH, the power automatically
comes on. You do not have to press
on the power.
32
CD LINE IN
to turn
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound as you want. (See
pages 22 and 23.)
To use the JVC SIRIUS Radio, refer to the
SIRIUS Radio Setup Manual (separate
volume).