HP EX475 - MediaSmart Server - 512 MB RAM User Manual page 125

While the Health indicator is blinking blue
d
paper clip to press the recessed Status/Recovery button until it
clicks.
Recovery mode is initiated.
If recovery mode is successfully initiated, the Health indicator light
e
blinks purple and red repeating.
On the Rebooting your server into recovery mode dialog box,
6
click Next, and then follow the instructions on each dialog box.
During the recovery process, the following may happen:
If the recovery program cannot find the server, see
page 7- 1
If the Server Recovery cannot recover the partition data, the progress
bar will go to 100% and then back to zero and start over.
If the recovery fails, see
If the HP MediaSmart Server or Windows Home Server Connector
software was not uninstalled in step 4 above, you may get a message
that the software already exists and would you like to reinstall. If you
get this messsage, select Yes.
After the Server Recovery or Factory Reset completes, the server
7
automatically restarts. Before taking the next step wait until the Health
indicator light is solid blue
You must reinstall the software on each of your computers, including the
8
computer that you used to perform the recovery—otherwise, you won't be
able to use the server.
Troubleshooting
2.
Recovery fails on page 7- 1
.
and red , use a
No server found on
2.
7-1 1